Editor choice GE 12751 Wireless Motion-Sensing Light Control Transmitter

GE 12751 Wireless Motion-Sensing Light Control Transmitter

Add your review

Automatically turn lights ON when motion is detected and OFF after 10 minutes of no motion.
Ideal for plug-in lamps and lighting in hallways, laundry rooms, entrance ways, and more.
Receiver has 1 grounded outlet and plugs into any standard household outlet – up to 100ft. range from motion sensor.
Motion Sensor has 30ft motion detection range and is battery powered – 3 AAA Batteries (Included)
Electrical Ratings – 12A, 120VAC, 60HZ, 360W Max Tungsten, 1440W Max Resistive, UL Listed
“GE Wireless Motion-Sensing Light Control Transmitter with 1 Grounded Outlet ReceiverAutomatically turn lights ON when motion is detected and OFF after 10 minutes of no motion. Ideal for plug-in lamps and lighting in hallways, laundry rooms, entrance ways, and more. Receiver has 1 grounded outlet and plugs into any standard household outlet up to 100ft. range from motion sensor. Motion Sensor has 30ft motion detection range3 AAA Batteries (Included)Electrical Ratings 12A, 120VAC, 60HZ, 360W Max Tungsten, 1440W Max Resistive, UL Listed”

$25.92

Best deal at: amazon.comAmazon
Buy for best price
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: GE, White, Wireless Motion-Sensing Control Transmitter with 1 Grounded Outlet Receiver, 30ft. Detection Range, Off after 10 Mins, for Lamps and Other Indoor Lighting, 12751, Sensor Switch - $25.92
Price history
×
Price history for GE, White, Wireless Motion-Sensing Control Transmitter with 1 Grounded Outlet Receiver, 30ft. Detection Range, Off after 10 Mins, for Lamps and Other Indoor Lighting, 12751, Sensor Switch
Latest updates:
  • $25.92 - 4 October 2021
  • $24.72 - 6 September 2021
  • $24.22 - 30 August 2021
  • $22.23 - 28 June 2021
  • $22.91 - 26 April 2021
Since: 26 April 2021
  • Highest Price: $25.92 - 4 October 2021
  • Lowest Price: $22.23 - 28 June 2021
Add to wishlistAdded to wishlistRemoved from wishlist 0
Last updated on 25 October 2021 9:53 pm
GE 12751 Wireless Motion-Sensing Light Control Transmitter
GE 12751 Wireless Motion-Sensing Light Control Transmitter

Description

That General Electric makes motion sensors and similar lighting equipment should not be something that will catch anyone off guard. For up to 30 feet, the GE 12751 plug-in motion sensor can detect motion and will be activated with the lights on. When there is no motion after initial detection, the lights will be turned off after ten minutes. Simple.

Further, compared to other plug-in sensor options listed here, the GE 12751 has a provision for greater wattage support and amperage. That is more advantageous to those who want to run several lights.

Structure and Appearance

This is a grounded outlet with the same measurements as that of a standard-sized outlet switch cover.

It requires a standard installation process, which is quite similar to regular wall sockets made by GE.

Take note of the fact that on the receiver, there is only one wall plug. For people who might need double sockets, that is a disadvantage.

Device Performance

You can run a culmination of 360 watts bulbs not above 12A. This simply means that aside from heavy machinery, you will be able to run any device on it.

The motion sensor is battery operated while the receiver is wired. Because of the combination of the two, no extra wiring is required.

When the receiver is plugged into an outlet, its wireless reach can be up to a maximum of 100 feet.

This is a range between the sensor and the power switch. Indoor bulbs and lighting is the ideal use for this.

Extra capabilities

When using the motion sensor outdoors, the GE 12751 is really good. A small matter here though is that the sensor unit is not waterproofed. You can decide to enclose it in some sort of a transparent bag to protect the transmitter from liquid when it is used outside.

Not wanting to use the device outdoors due to its vulnerability to wet weather is an option. However, with a basic protective cover, it would be very good for outdoor use.

Check it out on Amazon

How to Choose the Right Motion Sensor Plug-in Outlets

Having a clear and basic grasp of what best suits your home or office with regard to security and comfort is always the start in choosing the right motion sensor. Once you have identified your preference — based on your peculiarity or need —, the next step is to try as much as you can to be sure you can manage or avoid unexpected occurrences that could accompany the choice that you have made. Practically, this means that you should consider carefully, where the sensor will be placed, how frequently the sensor is likely to be used, and the sort of gadgets or devices that the sensor will be connected with. We consider these below:

Compatible Wattage

People commonly use motion sensor plugs and other indoor motion detectors for basic functions, such as to turn the bathroom, bedroom, hallway or kitchen lights on automatically. On the other hand, you can also switch on your smart TV, tea kettle and even a radio device automatically with the right plug-in motion sensor.

If the only thing you are intending to power is a few light bulbs, you do not have to bother yourself about the overall wattage that your motion sensor plug supports. However, if your intention is to connect larger devices to your motion sensor, then it is different. In that case, you must make sure that the plug’s capacity can comfortably handle large amounts of current.

From the higher level, you are likely to have plugs that support wattage for up to and around 360W. This is the cap at least for most domestic usages, except you seek higher power capacity plugs for use on specialized technical equipment.

Also, you have wattage, which is supported at, in and around 250W, when your sensor installations do not have to consider hard wiring.

Performance and Position of Sensor

Your sensor may have to be wired into an outlet, it might also be wired away from the outlet, or it could be run with a wireless connection to the outlet. This all depends on the device that you want to use it with.

In the market, the top wireless sensor outlets can stretch over 100ft of connectivity. At the other end of the market, the units of lower capacity can reach up to 50 feet of connectivity. To make the right choice, you will have to consider two things.

First, you will have to think about where movement will take place, and second, the location from where the sensor can be positioned to pick up motion.

Building sensors into wall sockets are a great way of preventing theft. However, this purpose is totally defeated in a situation where the wall socket is not placed or located in a good position where it can properly detect motion.

A range of around 30 feet detection of motion is what most motion sensors can cover. A motion sensor device’s sensitivity can sometimes be over or a little under, depending on the way it is built.

In most cases, it is preferable to have a sensor being a tad under-sensitive. The idea is the line between a switch taking an additional second before activating and a needless activation when there is no one actually entering the motion space.

Off-time Adjustability

Several motion sensor plug-ins do not provide the user with the leisure to make changes to the switch timer. The question then is, “What happens when there is no motion?” If you cannot adjust this timer, the motion sensor off-time ceiling is probably on the high, say, 10 minutes. Moreover, if you can make any changes to this, it might be for power saving – a minute or two minutes timer. Thus, having an option to adjust the sensor off-timer is very important.

Installation Difficulty

We have sensors that are plug and play devices. All you have to do is plug them into an available outlet, and you are all set. Some other motion sensors need to be properly installed on a wall replacing an electrical power socket.

Overall, not one of these kinds of installations are particularly hard to perform, in comparison, some installation difficulties outweigh others. It becomes worse if the instructions available to you are not adequate.

Sensor Build and Appearance

If you are one of those conscious about home decorations, aesthetics are usually one of the things you might consider before purchasing anything to set in your home. However, if your sensor is going to be hung in a closet or shed, the style of the sensor may not influence your choice.

Traditionally, motion sensors are typically manufactured from white matte plastic. This colour, however, can be changed easily by painting or any form of recolouring. In some cases though, they are made of well designed plastic mixed with glass. The colour of these plastics is harder to alter. So, when you want to choose wall socket-based motion sensor plugs, this is one thing you need to put into consideration.

The structural design and size of your motion sensor plug can cause a blockage to other wall sockets. Though this might be caused by both the socket position plus the sensor device, plugging some gadgets into electrical sockets will one way or the other restrict their availability of use by other devices. Have this in mind when choosing a motion sensor.

Price History

Price history for GE, White, Wireless Motion-Sensing Control Transmitter with 1 Grounded Outlet Receiver, 30ft. Detection Range, Off after 10 Mins, for Lamps and Other Indoor Lighting, 12751, Sensor Switch
Latest updates:
  • $25.92 - 4 October 2021
  • $24.72 - 6 September 2021
  • $24.22 - 30 August 2021
  • $22.23 - 28 June 2021
  • $22.91 - 26 April 2021
Since: 26 April 2021
  • Highest Price: $25.92 - 4 October 2021
  • Lowest Price: $22.23 - 28 June 2021
JD Squad